Driving Tutorial: In this video tutorial you will learn How To Drive A Motorcycle with text tutorial.
Text Tutorial
pre-riding test
Brake system: check that brakes are working correctly and that there is no breaks on the cables.
Suspension: Ensure that springs are working correctly and there is suspension liquid in the front fork tubes.
Clutch: Check that cable is running smoothly and clutch lever is moving while pulling the clutch bar.
Engine oil: Check the correct quantity from the dipstick. use at least 15W/50 motor oil. Notice that 10W/30 is too thin and it wil cause the engine malfunction.
Throttle: Make sure that there is proper gab and proper function in throttle system.
Steering bar: Check that everything moves like they should and all the clearances are correct.
Ignition switch: Make sure that lever is working correctly.
Now we have finished successfully all pre-riding test. your bike is ready for action, so let’s have a look to things you should do before a ride
- Pull side stand up with your left foot.
- Turn the fuel cock to the ON position.
- Drive chain: Check the slack at the center of the chain
- Check tire pressure, it should be above 1.5 bar. Check also the tire abrasion. career deepness should be more than one millimeter.
- Fuel tank: Make sure there is enough fuel to have a ride. use at least 93 octane lead-free fuel.
Diesel isn’t suitable for the motorcycle
- Spark plug: Use only C6HSA(NGK) spark plug when replacement is needed. Adjust the spark plug’s gap to 0.6~0.7 mm with a thickness gauge.
- Now lets start the motorcycle, You have to pull the starting lever out and stamp.
- DON’T FORGET to turn the choke to FULL position
- Motorcycle will start with no problem.